购物车摘要

购物车里还没有商品。

Human ACTG1 ELISA Kit

SKU: orb562299

描述

Human ACTG1 ELISA Kit

研究领域

Epigenetics

图片与验证

−

关键属性

−
反应性Human
样本类型Serum,Plasma,Cell Culture Supernatant,Cell or tissue lysate,Other liquid samples
检测类型Sandwich
检测时间4 hours
范围31.25-2000pg/ml
灵敏度18.75pg/ml

步骤与表现

−
Assay Principle
The kit is based on a sandwich enzyme immunoassay principle. The microtiter plate is pre-coated with a capture antibody specific to the target analyte. Standards or samples are added to the wells, followed by a biotin-conjugated detection antibody specific for the analyte. Avidin conjugated to horseradish peroxidase (HRP) is then added and incubated. After addition of the TMB substrate, color develops only in wells containing the analyte bound to the detection antibody and HRP–avidin complex. The reaction is stopped with an acidic solution, and absorbance is measured at 450 nm ± 10 nm. The analyte concentration in the samples is determined by comparison with a standard curve.
Kit Components
1. ELISA Microplate
2. Standards
3. Detection Antibody
4. HRP-Streptavidin Conjugate
5. TMB Substrate
6. Dilution buffers
7. Stop Solution
8. Wash Buffer
9. Plate Sealers
10. Manual
Reagent Preparation
1. Wash Buffer: Prepare the 1X Wash Buffer using distilled water according to the manual.
2. Standard: Perform gradient dilution according to the instructions in the manual.
3. Other Concentrated Reagents: Dilute the concentrated reagents using the Dilution Buffers provided in the kit to 1 X working solutions as instructed in the manual. Always use a clean pipette tip for each different solution.
Assay Procedure
After the kit equilibrates to room temperature, add standards or samples to each well and incubate.
Discard liquid, add wash buffer to each well, wash the plate twice, and blot dry on clean absorbent paper.
Add biotinylated antibody working solution to each well and incubate.
Discard liquid, add wash buffer to each well, wash the plate three times, and blot dry on clean absorbent paper.
Add streptavidin-HRP working solution to each well and incubate.
Discard liquid, add wash buffer to each well, wash the plate five times, and blot dry on clean absorbent paper.
Add TMB substrate solution to each well and incubate in the dark.
Add stop solution to each well, mix thoroughly, and immediately read OD at 450 nm.
Materials Required
1. Microplate readers
2. Centrifuge
3. Incubator
4. Automated plate washer
5. Single-channel or multi-channel high-precision pipettes
6. Disposable pipette tips
7. Sterile tubes
8. Eppendorf tubes
9. Absorbent paper
10. Loading slots
Precision
Intra-assay Precision (Precision within an assay): CV% < 8%
Intra-assay precision was evaluated by testing multiple replicates of samples within the same plate.

Inter-assay Precision (precision between assays): CV% < 10%
Inter-assay precision was evaluated by testing samples across different plates.
Calculation of Results
1. Average the duplicate readings for each Standard, Control, and Sample, and subtract the mean optical density of the zero Standard.
2. Construct a standard curve by plotting the target concentration on the y-axis against absorbance on the x-axis and draw a curve through the data points.
3. Determine the sample concentration by substituting the OD450 value into the standard curve. For diluted samples, multiply the calculated value by the corresponding dilution factor.
Curve Fitting Softwares
1. Curve Expert
2. Thermo SkanIt RE
3. SciDAVis
4. LabPlot
5. ……

储存与操作

−
储存2 - 8 °C for 12 months
有效期Please enquire.
免责声明For research use only

别名

−
ACTG1|Actin Gamma 1|ACTG|BRWS2|DFNA20|DFNA26

相似产品

−
质量保证

质量保证

Explore bioreagents carefree to elevate your research. All our products are rigorously tested for performance. If a product does not perform as described on its datasheet, our scientific support team will provide expert troubleshooting, a prompt replacement, or a refund. For full details, please see our 条款与条件和选购指南.

UniProt 详情

−
暂无 UniProt 数据

实验方案信息

可选规格

请在下方选择规格

48 T
¥ 4,550.00
96 T
¥ 5,980.00
发货Usually dispatched within 5-10 working days
批量询价